Detailed introduction:
Product Introduction:
H5301 vacuum pump oil composite agent is formulated with various additives such as extreme pressure anti-wear agents, antioxidants, corrosion inhibitors, etc., and has good anti-oxidation, anti-wear, anti rust, and anti emulsification properties.
The vacuum pump oil product formulated with this product has good thermal oxidation stability, emulsification and sealing properties, and can maintain high ultimate vacuum degree and fast pumping rate in use at higher ambient temperatures.
Recommended dosage:
Type | Recommended dosage increase（W%） |
Mineral oil type vacuum pump oil | 0.6 |
Diffusion pump oil | 0.8 |
Boosting pump oil | 1.0 |
Typical data:
Project | Typical Data | Test Method |
Kinematic viscosity，40℃，mm2/s | 42.37 | GB/T 265 |
Density，20℃，g/cm3 | 0.9906 | GB/T 1884 |
Flash point (opening)，℃ | 136 | GB/T 3536 |
| Element content |
Phosphorus content，% | 4.32 | GB/T0296 |
Sulphur content，% | 4.46 | GB/T17040 |
Packaging, storage and transportation:
When storing, loading and unloading, and adjusting oil, the temperature should not exceed 75 ℃ according to SH/T0164; If stored for a long time, the temperature should not exceed 45 ℃. This product is non flammable, non explosive, and non corrosive. It is similar to general petroleum products in terms of safety, environmental protection, and use, and does not require special protection.
200 liter iron drum packaging, with a net content of 200Kg/drum.
中文
English
Copy product links
Long by picture save/share
