Detailed introduction:
Product Introduction:
H8040 is a sulfur phosphorus nitrogen type vehicle gear oil composite agent developed by the China Academy of Petroleum Sciences. It has a reasonable formula, stable performance, good extreme pressure resistance, anti-oxidation, and anti rust properties. It has good compatibility with Class II and III base oils and synthetic oils, low dosage, good economy, and strong applicability. The formulated oil meets the requirements of the new national standard GB13895-2018.
H8040 can be used to modulate the following viscosity grades of APIGL-5 grade vehicle gear oil.
SAE 80w90、85w/90、85w/110、85w/140、80w/110、80w/140
| Performance Level | Recommended additives (m%) |
GL-5 GL-4 | 4.0 2.0 |
Product Quality Project:
| Project | Quality Index | Typical data | Test Method |
| Kinematic viscosity(40℃)，m㎡/s | Actual testing | 9.46 | CB/T 265 |
| Density(20℃)，s/cm³ | 0.9-1.2 | 0.9882 | GB/T 2540 |
| Element content ，m% |
| Sulphur | ≥25 | 28.15 | SH/T0303 |
| Phosphorus | 1.5 | 1.85 | SH/T0296 |
| Nitrogen | ≥0.3 | 0.41 | SH/T0224 |
Packaging, storage and transportation:
200kg/iron drum or 1000kg IBC drum packaging, with a net content of 200kg/drum. The temperature of this product should not exceed 60 ℃ during storage, loading and unloading, and oil blending. If stored for a long time, the temperature should not exceed 45 ℃. This product is non flammable, non explosive, and non corrosive. There is no need for special precautions during use, but general precautions for handling chemicals should be followed. If it comes into contact with the skin, it can be thoroughly washed with detergent, soap, and water.
中文
English
Copy product links
Long by picture save/share
