Detailed introduction:
Product Introduction:
A compressor is a mechanical device used to compress gas, increase gas pressure, or transport it. According to the structure of the compressor, it can be divided into two categories: volumetric and velocity. Due to the different exhaust gases, pressures, and compression media, the compressor is different. The requirements for compressor oil are different. The H6030 compressor oil compound developed is extremely convenient to use in liquid form and is suitable for the blending of reciprocating compressor oil and rotary compressor oil. Finished oil has excellent antioxidant properties, low tendency to accumulate carbon, good rust prevention and water separation properties, and good anti-wear effect. It can be formulated with viscosity grade compressor oil such as I32, I46, I68, etc.
Product nature:
H6030 composite agent is composed of various antioxidant, rust inhibitor, anti-wear agent and other component additives, fully exerting the synergistic effect between additives to achieve the best combination. Modulated DAG and DAH grade compressor oil has excellent anti-oxidation and anti rust properties, as well as good resistance.
Typical data:
| Project | Typical data | Test Method |
| Appearance | Brown transparent liquid | visualization |
| Kinematic viscosity 100m㎡/s | 6.68 | GB/T265 |
| Flash point (opening),℃ | 160 | GB/T3536 |
| Density,20℃，g/cm³ | 1.002 | GB/T2540 |
| Nitrogen content(N)，% | 1.8 | SH/T0224 |
Packing:
200 liter drum: net content of 200kg drum.
The temperature of this product should not exceed 60 ℃ during storage, loading and unloading, and oil blending. If stored for a long time, the temperature should not exceed 45 ℃. This product is non flammable, non explosive, and non corrosive. There is no need for special protection during use, but general precautions for handling chemicals should be followed. If in contact with the skin, detergent and soap can be used.
中文
English
Copy product links
Long by picture save/share
